Nuto H Series
Premium Quality Anti-wear Hydraulic Oils
Product Description
Nuto H Series oils are premium quality anti-wear hydraulic oils intended for industrial and mobile service applications where anti-wear lubricants are required. They are formulated with high quality base oils and a select additive system that results in products that provide many desirable features to improve and prolong equipment life. Nuto H Series oils are designed to provide good performance in a range of hydraulic components used in systems subjected to moderate to severe operating conditions. These products meet the performance requirements of a wide range of hydraulic system and component OEM's.
Features and Benefits
The Nuto H Series hydraulic oils help reduce the potential for wear and corrosion, particularly where water or moisture is present. Their effective oxidation resistance and chemical stability support good oil life in moderate to severe applications. Their high level of anti-wear properties prevents wear in vane, gear and piston pumps used in hydraulic service. Their good demulsibility characteristics permit the oils to work well in systems contaminated with small amounts of water yet readily separate large amounts of water.
The Nuto H Series oils offer the following features:
Good anti-wear performance reducing pump wear and leading to long pump life
Fast air release, good foam control and good water separability
Corrosion protection that reduces the negative effects of moisture on system components
Filterability to prevent filter blockage even in the presence of water
Effective oxidation and chemical stability characteristics allows good oil and filter life
Applications
Systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic oils are recommended
Hydraulic applications where contamination or leakage are unavoidable
Where small amounts of water are unavoidable and this water could damage components
Systems containing gears and bearings where mild anti-wear characteristics are required
Applications where thin oil-film corrosion protection is an asset such as systems where small amounts of water exist
Specifications and Approvals
| Nuto H Series meets or exceeds the requirements of: | Nuto H 32 | Nuto H 46 | Nuto H 68 | Nuto H 100 | Nuto H 150 |
|---|---|---|---|---|---|
| DIN 51524-2 2006-09 | X | X | X | X | |
| ISO 11158 TYPE HM (1997) | X | X | X | X | X |
| Nuto H Series has the following builder approvals | Nuto H 32 | Nuto H 46 | Nuto H 68 | Nuto H 100 | Nuto H 150 |
|---|---|---|---|---|---|
| Denison HF-0 | X | X | X | ||
| Cincinnati Machine P-68 | X | ||||
| Cincinnati Machine P-69 | X | ||||
| Cincinnati Machine P-70 | X | ||||
| Vickers I-286-S | X | X | X | ||
| Vickers M-2950-S | X | X | X |
Typical Properties
| Nuto H Series | Nuto H 32 | Nuto H 46 | Nuto H 68 | Nuto H 100 | Nuto H 150 |
|---|---|---|---|---|---|
| ISO Viscosity Grade | 32 | 46 | 68 | 100 | 150 |
| Viscosity, ASTM D 445, | |||||
| cSt @ 40ºC | 32 | 46 | 68 | 100 | 150 |
| cSt @ 100ºC | 5.4 | 6.7 | 8.5 | 11.1 | 14.6 |
| Viscosity Index, ASTM D 2270 | 104 | 104 | 107 | 95 | 95 |
| Copper Strip Corrosion, ASTM D 130 | 1A | 1A | 1A | 1A | 1A |
| Rust Characteristics, ASTM D 665B | Pass | Pass | Pass | Pass | Pass |
| Pour Point, ºC, ASTM D 97 | -24 | -24 | -18 | -15 | -18 |
| Flash Point, ºC, ASTM D 92 | 212 | 226 | 234 | 242 | 258 |
| Density 15ºC, ASTM D 1298, kg/L | 0.872 | 0.876 | 0.882 | 0.884 | 0.887 |
| Demulsibility time (minutes) to 3ml emulsion; | |||||
| @ 54ºC | 15 | 15 | 20 | - | - |
| @ 82ºC | - | - | - | 10 | 5 |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.